In ice hockey, players use special tools to facilitate game play and for protection as this is a sport where general injuries are, therefore, all players are encouraged to protect their bodies from bruising and severe. fracture.
Video Ice hockey equipment
​​â € <â €
Hard surfaces of ice and boards, pucks shot at high speed, and other players maneuvering (and often deliberately colliding, also known as "checks") pose several security hazards. In addition to ice skates and sticks, hockey players are usually equipped with various safety equipment to reduce the risk of serious injury. These usually include helmets, shoulder pads/chest protectors, elbow pads, mouth protectors, protective gloves, sprinter shorts, athletic athlete shields, shin pads and neck protectors. Goaltender uses masks and many special equipment designed to protect them from many blows directly from the puck. Hockey skates are usually made of a thick layer of leather or nylon to protect the legs and legs of the bottom of the player from injury. The blades are rounded at both ends for easy maneuvering. However, the Goaltenders skate has a lower blade to the ice and is more square than round; this is a boon for the aviators, for whom mobility and lateral stability are more important than speed and speed.
Maps Ice hockey equipment
History
Goalies allowed special variations on the equipment, both to increase their chances of stopping pucks and for extra protection. They offer more protection from frontal collisions, while generally providing lesser or nonexistent protection to goat backs. This is because a goalkeeper must always face action and punches in areas that are not soft is generally a mistake on the part of the goalkeeper. Almost all of the following tools are required in any league:
- Destination stick - Combines larger blades of player stick and expanded flat axle. These are almost always made of wood for durability, compared to carbon fiber construction from modern player sticks, but may have fiberglass or carbon fiber panels on the blades and shafts to improve impact resistance. Mostly used to block, but the goalkeeper can play a chip with it. Blades can be curved to help play the puck.
- Skate goal - A thick blade with a larger blade radius and less support for the ankle allows the goalkeeper to slide off his shoe to make the "pad stop" easier. Boot closer to the ice surface than a regular hockey skate to prevent the pucks from slipping through the area between the boot and the skate knife. Normal hockey skates are technically permissible because they provide adequate thrust and protection, but are hardly ever seen.
- Goalkeeper mask or helmet and wire mask. Masks are mounted on the player's face and can withstand some high-speed effects of the pucks. Most of the leagues now recommend or require that the goalkeeper hang a neck protector (somewhat like a gorget in form and function) and/or wear a soft neck protector to protect against pucks and skate blades. This is now required for all wicket in NHL after the famous incident in which the vein of the goalkeeper Clint Malarchuk's neck was interrupted in the game by skate knife player Steve Tuttle.
- Chest and arm guards - Thicker on the front than the player's shoulder pads, also equipped with a forearm, elbow and biceps protection. The protective area extends to the abdomen and is usually tied to the pants to provide unlimited protection. These pads offer little spine/back protection to save weight and materials, and to prevent heat buildup.
- Blocker - Used in a hand holding a stick, it is a glove with a rectangular pad on the back, used to deflect a shot. Modern innovations include curved sections to direct the pucks blocked out instead of up or back, and a special shaped front to allow a 'paddle down' store where the stick is placed horizontally on the ice surface. Blockers are generally limited in the overall surface area by league rules.
- Catch a glove or trapper - Used in opposite hands, used to collect ice chips or catch flying shots. A goalkeeper can freeze the game and force faceoff by holding or trapping pieces in a capturing glove, or they may "catch and release" by catching and then dropping the pieces behind the net or into their own rod to play them. The catch is limited by the league rules with the width of the wrist pads, and throughout the glove circle.
- Goal jock or jill - Better pelvic protection and more padding in front of cup than player athlete. Provides lower abdominal protection and larger/stronger cups.
- Pants - Combine thick thigh thighs and additional hip/pelvic protection, but grout protection is reduced (this is reduced by athletes and allows increased flexibility).
- Destination pad - Probably the most visible part of the matching equipment, the "foot" keeper is a thick, flat swinging pad that covers the top of the skate, shin and knee of the player, and features additional pads on the inside of the legs and knees to protect knee joint when falling to "butterflies". Pads are 11 or 12 in (279 or 305Ã, mm) width (change of new NHL rules reduce bearing width) and size according to foot of individual player. Most of the shooting is blocked by some method of "stop pad".
- Socks - Close the legs of the feet up just above the knee or above. Usually this is the only protection given to the goat calf, because the back end of the cheaper model bearing is just a string of ropes. An expensive goalkeeper does offer a flexible flap that is designed to protect the calf.
Usually the stick is held in the right hand with the blocker, and the capture glove is on the left. However, the "right full" goal reverses this, holding the right curve stick in the left hand and catching it right. This is largely a personal preference, depending on which hand is most comfortable for the goalkeeper. The stick bar may be flat or curved to assist in playing the puck, depending on personal preferences and handrail style; a flat blade is generally better to stop the puck, while a more curved knife allows for easier "lifting" a shot from the blade to the front/center. The rod of a stick knife may be slightly curved to help take it out of the ice when it falls.
Famous brand
- Bauer Hockey
- CCM (ice hockey)
- Cooper Canada
- Jofa
- Koho (company)
- Micron (skate company)
- Hockey Mission
- Reebok
- Sher-Wood
- Vaughn Hockey
- Sports Soldiers
- HockeyShot
Facemask Controversy
Teens and college hockey players are required to wear masks made of metal wire or transparent plastic attached to their helmets that protect their faces during play. Professional and adult players can even wear visors that only protect their eyes, or no masks at all; however, some provincial and state laws require full face protection at all non-professional levels. The rules about visors and face masks are somewhat controversial at the professional level. Some players feel that they are disturbing their sight or breathing, or are pushing high wands in a reckless way, while others believe they are the necessary safety precautions.
In fact, the adoption of safety equipment has become one gradually at the professional level of North America, where even helmets are not mandatory until the 1980s. The famous goalkeeper, Jacques Plante, had to suffer an easy blow to the face with a flying flap in 1959 before he could persuade his coach to allow him to wear a protective goalie mask in the game.
References
External links
- Canada Hockey: Protect and Prevent (video)
Source of the article : Wikipedia
0 Comments